FREE Top Artwork print until April 1st !
BZKT | Fightstick
High quality enclosure
Every BZKT is carefully made individually in the workshop, insuring an optimal build quality with nice and smooth edge cuts
Unique design solutions
Designed to provide unique solutions to facilitate equipment, daily use and maintenance
Clever built-in features
Fine-tune your setup thanks to great and clever solutions
Original and versatile
Whether you prefer simplicity or eye-catching customizations, the versatile BZKT design lends itself to all desires
What you get with every BZKT
- Premium quality enclosure laser cut in the workshop from cast acrylic only (6mm body, 3mm cover)
- Compatibility with 30/24mm snap-in and 9mm panel friendly screw-in buttons *
- Unique trimmed nesting design insuring a perfect stability of the panels
- Complete embeded nuts conception for unmatched equipment & maintenance ease (all parts are mountable/dismountable with a simple allen key)
- Enclosure design allowing for the widest joystick models compatibility from standard Sanwa JLF/X to ~45mm body height corean levers (mid/full collars needs 35mm top hole) **
- (Optional) Unique SS plate window cut & dedicated mounting nuts allowing for Selmitsu LS-32/40 with SS plate compatibility
- Unique quick release 2 positions PCB tray ***
- 6 nice aluminium body pillars
- Stainless steel hardware
- Integrated USB-C passthrough included (Neutrik front side slot cut also available for free)
- Built-in cable management straps
- Quick opening magnetic bottom panel
- Integrated tool set support into the bottom panel
- Bottom BZKT integral cushion
- Free layout selection
- Free tool set including 1 dual screw driver, 2 allen keys, and 2 unique “snap-out” button tools
- Free BZKT dust washer (45mm)
- Free BZKT front/back covers marking
Dimensions : 380mm x 220mm x 58mm (+/- 1mm) enclosure only
Typical complete build weight : 2.25 Kgs
* Screw-in buttons compatibility may vary depending of the button nuts and the selected layout. Please ask me to make sure
** Default vertical mounting holes/nuts are standard Sanwa type plates compatible (including Seimitsu SE/MS plates)
*** Some PCB orientation and PCB tray positioning limitations may occur depending of the selected layout. Please refer to the layout section, or ask me to make sure
Layout
+1 +2 and +3 are free button options, please specify in your order
Any button removal based on layouts shown on the picture above is free
Depending on the number of top panel buttons, let me know if you want a plain left side body/cover (USB-C connector only)
* Button limiting right side PCB tray mounting/unmounting (unusable if screw-in button)
** The OVERCOOKED layout is only compatible with left side PCB mounting with USB-B connector turned left (right side auxiliary PCB connectors may also need adaptations to be used), is not compatible with optional SS plate window cut & nuts for horizontal mounting (SS plate window cut and mounting is still possible vertically as an option in place of the default standard mounting), and use a non-standard (but interchangeable) toolset foam allowing for ~46mm body height korean lever installation only with this specific layout (please take this into account for any future layout swap)
Cushion
Choose you style from a selection of free BZKT integral bottom cushion designs.
Cool stuff : the fightstick on the logo will match the control style of the chosen button layout, independently of the cushion pattern you pick !
Setup
FREE Top Artwork print until Aprl 1st !
Options and shipping not included. Assembly included for every order.
UnPACKed – Keep it simple or refine the recipe as your liking
Enclosure : 150€
Complete build : from 350€
Top PACK – Top Art commission & printing included
Enclosure : 200€ 185€
Complete build : from 400€ 385€
Super PACK – Top & Sides Art commission with Top printing and Sides printing or marking
Enclosure : 250€ 235€
Complete build : from 450€ 435€
Deluxe PACK – Top, Sides & Cushion Art commission, including printing, marking and etching
Enclosure : 300€ 285€
Complete build : from 500€ 485€
Power UP – Extra customizations on various elements such as dust washer, panels, toolset… The icing on the biscuit !
From 50€
EQUIPMENT : Complete builds standard equipment is composed of Sanwa joystick & buttons (solid colors), a Brook GEN-5X PCB (PC/PS5/XS/Switch), and internal wiring. Specific equipment is available on request.
For enclosure to equip yourself, a simple but clean cable management is highly recommended to ensure the bottom lid to close properly.
ART COMMISSIONS : Handled by GODSPEED, our talented collaborative artist ! He will be happy to respond to your requests as best he can, wether it is about printing, marking or etching, within the limits of what the package allows and includes.
Artwork commissions included in packages are elaborated based on graphics and/or thematics you provide and are essentially about graphics adaptation and assembly.
If you are looking for a limitless art commission, I suggest you get in touch with a freelance artist… our very own GODSPEED do that too !
Colors & Options
Body color : glossy black – glossy white
Cover panel colors : matte black – glossy black – matte white – glossy white – clear
Independent for each cover piece
Dust washer color : black – white – clear
Toolset color : black – crème
Bottom cushion color : black – white
Trim nesting & other thin foam pieces color : black – white
Top joystick hole diameter : 24 mm – 30mm – 35mm
Independent for body & cover – Full collar Korean levers require 35mm body+cover -Mid collar Korean levers require 35mm body
Dust washer inner diameter : 9mm – 10,5mm – 11mm – 12,5mm
To match the joystick shaft you plan to use, just tell me the model if you’re not sure
Plain left side body/cover : free
No left side buttons
Custom layout : depending of the request – please ask me
SS plate window cut & nuts : 10€
Additional horizontal Seimitsu SS plate mounting (includes compensation/supporrt pad)
Specific joystick mounting holes/nuts : please ask me
Neutrik passthrough cut : free (10€ for complete builds)
No built-in USB-C nor Neutrik interface delivered with enclosure only
Artwork print & cut : top 15€ FREE until April 1st – front+back 10€ – left+right 5€
Printed with 8 colors Canon PRO-200S on semi-gloss Canon photo paper – Include button inserts
Unlisted request ?
Tell me what you want and let’s discuss it !